Build the stairs.We'll pull the parts.
Set the size, pick treads and a railing look, and get a parts list with our model numbers. Call it in or bring it to any of our six stores.
1The stairs
How do you want to start?
The open space between the two flights, measured from side to side.
Winder treads on the landingIf you have winder treads, we recommend your installer makes them to match your floor or your new treads. They are not on the parts list.
Please enter your measurements here. Tap a box and the 3D view shows you what to measure.
C Tread depth: riser face to riser face, without the overhang.
Count the steps you walk on. Everything else is in inches; fractions work (10-1/4).
2Treads & risers
At least 10 characters (0/10)
3Railing & newels
Pick a wall bracket to add it. It uses the same handrail as your stairs.
Fine-tune the rail
4Balusters
Both sides are walls, so there are no balusters. Go back to step 1 to open a side.
Tap a spot (1, 2, 3), then pick a baluster for it below. When the tread looks right, press Apply to all treads.
The small cover at the bottom of each iron baluster.
More baluster options
5Balcony
Tap a spot, pick a baluster, then repeat it across the balcony.
6Your list
Your parts list is ready. Check it, then send it to your store or copy it.
See my parts listYour work here is done! 🎉
Go grab a coffee. Your stairs are designed and every part is on the list, down to the last bracket.
Upload a photo of your stairs. We read it, set up the staircase for you, and show your new stairs in the photo.
Draw the new rail on my photo myself
Tap where the railing starts at the bottom, then where it ends at the top. We draw the parts you picked over the photo. A quick mock-up, not a measurement.
Your parts list
* Free 30-day returns, no questions asked, on in-stock items, unopened and in their original condition, at any of our six stores with your invoice. Special orders can't be returned. From day 31 to day 90 a 35% restocking fee applies; after 90 days sales are final. See our full return policy.
Better a baluster too many than a gap too wide.
Estimate only. Quantities are rounded up from the sizes you enter, and sizes are nominal. Have a sales associate check the list before you cut.
Balusters are spaced so a 4" sphere can't pass. Always check local building code for rail height, baluster spacing, graspability, riser height and tread depth.
Stock and prices can vary by store on some items; any store can check the others by phone. We're proud of our free 30-day returns, no questions asked, on all in-stock items, so unopened leftovers go back free. Special orders can't be returned.