Real oak on top.Plies doing the heavy lifting.
Real American oak. Made in the USA.
Unfinished engineered red oak and white oak, made in the USA, from 2-1/4" strip to 7" plank. Four ways to build a board, and a wear layer you sand, stain and finish your way.
Four engineered builds. Zero mystery.
Every board is a real oak wear layer over a stack of plies, each one turned 90° to the next. That cross-ply stack is what keeps a board flat when the humidity can't make up its mind. Here's what's inside each one.
- Wear layer · 2.7–3.2mmRotary-cut red oak, unfinished. Ply 1 of 3.
- Ply 2 · cross-grain coreRuns 90° across the face to hold the board flat.
- Ply 3 · backingRuns with the face and balances the board.
3/8" · 3-ply
The low-profile build: a full rotary face on a board just 3/8" tall.
- Wear layer
- 2.7–3.2mm
- Cut
- Rotary
- Species
- Red oak
- Grade
- #1 & Better
- Widths
- 2-1/4", 3", 5"
- Wear layer · 2.5–2.7mmRotary-cut red or white oak, unfinished.
- Plies 2–4 · cross-ply coreThree plies, each turned 90° to the next.
- Ply 5 · backingBalances the board from underneath.
1/2" · 5-ply
The everyday build: five plies, red or white oak, strip to 7" plank.
- Wear layer
- 2.5–2.7mm
- Cut
- Rotary
- Species
- Red oak, white oak
- Grade
- #1 & Better
- Widths
- 2-1/4", 3", 5", plus 7" in white oak
- Wear layer · 4mmSliced red or white oak, unfinished.
- Plies 2–8 · cross-ply coreSeven thin plies, each turned 90° to the next.
- Ply 9 · backingBalances the board from underneath.
5/8" · 9-ply
The stiff one: nine plies under 4mm of sliced oak, in three grades.
- Wear layer
- 4mm
- Cut
- Sliced
- Species
- Red oak, white oak
- Widths
- 3-1/4", plus 5" in white oak
- Grades
- Premier, Traditional, Mountain Classic
- Wear layer · 4mmSawn red or white oak, unfinished.
- Plies 2–4 · cross-ply coreThree thick plies, each turned 90° to the next.
- Ply 5 · backingBalances the board from underneath.
5/8" · 5-ply
The wide-plank build: a 4mm sawn face in 5" and 7", in three grades.
- Wear layer
- 4mm
- Cut
- Sawn
- Species
- Red oak, white oak
- Widths
- 5", plus 7" in white oak
- Grades
- Premier Select, Character, Ozark Mill Run
American oak. American made.
Every engineered board on this page is made in the USA from real American red oak and white oak.
Same oak. Three ways to cut it.
How the wear layer comes off the log decides how the grain looks once the finish goes down.
Rotary cut
The log spins against a blade and the wear layer peels off in one long sheet. Wide, bold grain and the most floor for the money.
Sliced cut
The blade slices straight through the log, so the grain reads like a solid board instead of a peeled sheet.
Sawn cut
Cut with a saw, the same way solid lumber is. The face looks like solid because, up top, it is.
Any color. Any sheen. Your call.
Every board here ships raw, so the finish is yours to decide. Stain it any color you like, then topcoat it in any sheen from extra matte to gloss.
Colors and sheens are simulated on screen. Test your stain on a sample board before you commit.
See stains and finishesThe whole engineered lineup, by width.
Find your width, then pick the species, grade and build. Every row is a stocked item, made in the USA. Call your location to check stock before you hook up the trailer.
| Species | Grade | Thickness | Plies | Cut | Wear layer | ||
|---|---|---|---|---|---|---|---|
| 2-1/4"3 stocked items · 3/8" and 1/2" · rotary cut | |||||||
| Red oak | #1 & Better | 3/8" | 3-ply | Rotary | 3/8" · 3-ply · rotary cut | 3.2mm | See the build |
| Red oak | #1 & Better | 1/2" | 5-ply | Rotary | 1/2" · 5-ply · rotary cut | 2.5mm | See the build |
| White oak | #1 & Better | 1/2" | 5-ply | Rotary | 1/2" · 5-ply · rotary cut | 2.7mm | See the build |
| 3"3 stocked items · 3/8" and 1/2" · rotary cut | |||||||
| Red oak | #1 & Better | 3/8" | 3-ply | Rotary | 3/8" · 3-ply · rotary cut | 3.2mm | See the build |
| Red oak | #1 & Better | 1/2" | 5-ply | Rotary | 1/2" · 5-ply · rotary cut | 2.5mm | See the build |
| White oak | #1 & Better | 1/2" | 5-ply | Rotary | 1/2" · 5-ply · rotary cut | 2.7mm | See the build |
| 3-1/4"5 stocked items · 5/8" · sliced cut | |||||||
| Red oak | Premier | 5/8" | 9-ply | Sliced | 5/8" · 9-ply · sliced cut | 4mm | See the build |
| Red oak | Traditional | 5/8" | 9-ply | Sliced | 5/8" · 9-ply · sliced cut | 4mm | See the build |
| White oak | Premier | 5/8" | 9-ply | Sliced | 5/8" · 9-ply · sliced cut | 4mm | See the build |
| White oak | Traditional | 5/8" | 9-ply | Sliced | 5/8" · 9-ply · sliced cut | 4mm | See the build |
| White oak | Mountain Classic | 5/8" | 9-ply | Sliced | 5/8" · 9-ply · sliced cut | 4mm | See the build |
| 5"8 stocked items · 3/8", 1/2" and 5/8" · all three cuts | |||||||
| Red oak | #1 & Better | 3/8" | 3-ply | Rotary | 3/8" · 3-ply · rotary cut | 2.7mm | See the build |
| Red oak | #1 & Better | 1/2" | 5-ply | Rotary | 1/2" · 5-ply · rotary cut | 2.7mm | See the build |
| Red oak | Premier Select | 5/8" | 5-ply | Sawn | 5/8" · 5-ply · sawn cut | 4mm | See the build |
| White oak | #1 & Better | 1/2" | 5-ply | Rotary | 1/2" · 5-ply · rotary cut | 2.7mm | See the build |
| White oak | Mountain Classic | 5/8" | 9-ply | Sliced | 5/8" · 9-ply · sliced cut | 4mm | See the build |
| White oak | Premier Select | 5/8" | 5-ply | Sawn | 5/8" · 5-ply · sawn cut | 4mm | See the build |
| White oak | Character | 5/8" | 5-ply | Sawn | 5/8" · 5-ply · sawn cut | 4mm | See the build |
| White oak | Ozark Mill Run | 5/8" | 5-ply | Sawn | 5/8" · 5-ply · sawn cut | 4mm | See the build |
| 7"4 stocked items · 1/2" and 5/8" · white oak | |||||||
| White oak | #1 & Better | 1/2" | 5-ply | Rotary | 1/2" · 5-ply · rotary cut | 2.7mm | See the build |
| White oak | Premier Select | 5/8" | 5-ply | Sawn | 5/8" · 5-ply · sawn cut | 4mm | See the build |
| White oak | Character | 5/8" | 5-ply | Sawn | 5/8" · 5-ply · sawn cut | 4mm | See the build |
| White oak | Ozark Mill Run | 5/8" | 5-ply | Sawn | 5/8" · 5-ply · sawn cut | 4mm | See the build |
All items are unfinished and made in the USA. Stock moves fast, so call your location before you drive.
Pick your character.
Seven grades across the lineup, from clean and quiet to knots with opinions. Ask at the counter to see a board before you load up.
#1 & Better
All 3/8" and 1/2" rotary, red and white oakShown sanded and finished on site.Premier
5/8" sliced, 3-1/4", red and white oakTraditional
5/8" sliced, 3-1/4", red and white oakMountain Classic
5/8" sliced, 3-1/4" and 5", white oakPremier Select
5/8" sawn, 5" red oak, 5" and 7" white oakCharacter
5/8" sawn, 5" and 7", white oakOzark Mill Run
5/8" sawn, 5" and 7", white oakUnfinished floor, finished order.
Need prefinished engineered instead? We carry that too. Call your location for what's in stock.