Sand, seal, stain, finish. Skip a step and the floor will tell on you, usually right after the client moves the furniture back. Here’s the product list for a hardwood refinishing job, in the order you’ll use it, so nothing holds up the crew.
1. Sand: machines and abrasives
A flat floor with a clean scratch pattern is what makes the finish look right. We carry the Bona machines many crews run: the Bona Belt sander for the first cut, the Bona Edge for perimeters and closets, and the FlexiSand with Power Drive for direction-free sanding and a very flat floor. Pair them with the Bona DCS 70 dust containment for close to dust-free sanding in occupied homes.

For abrasives, Bona Green Ceramic belts and edger discs come in grits from 36 to 120, so the edges blend with the field. Bona rates them to cut faster and last longer than competing ceramic abrasives.
2. Fill: wood patch and putty
Fill gaps, nail holes and checks before the final pass. We carry Woodwise and DuraSeal fillers that take stain at rates similar to natural wood, sand easily and hold up once cured.
3. Seal: the base of the system
A sealer controls how the finish looks and how evenly the floor takes the topcoat. Bona sealers can be mixed with the topcoat that fits the job: NordicSeal for a light, Scandinavian look, NaturalSeal for a raw-wood look, ClearSeal, IntenseSeal and AmberSeal for added warmth, and DriFast when you need fast dry times.
4. Stain: color without the wait
We carry 30+ stain colors across three well-known brands, including DuraSeal Quick Coat in every color at all six stores. Our oil-modified stains dry in about two hours and work under both oil-based and water-based finishes. Test on a sample board first: red oak and white oak take the same color differently.
5. Finish: pick the topcoat for the traffic
| Job | Finish to consider |
|---|---|
| Busy kitchens, restaurants, retail | Bona Traffic HD (two-component) |
| The unfinished white oak look | Bona Traffic HD RAW |
| Stairs, commercial, aging-in-place | Bona Traffic HD Anti-Slip |
| Two-component durability, no mixing | Bona Traffic GO |
| Moderate-traffic residential | Bona Mega ONE or Bona Mega |
| Budget-friendly residential | Bona Domo |
| Warm amber tone, oil-based | DuraSeal oil-based polyurethane |

Working in hot, dry conditions or on a big floor? Bona Retarder slows drying to help prevent lap marks. Read more about oil-based in Why We Love DuraSeal, and see the full Bona lineup on our Bona page.
The refinishing checklist
- Belt sander, edger and buffer, plus dust containment
- Green Ceramic belts and discs in every grit you’ll step through
- Wood filler matched to the species
- Stain, tested on a sample board
- Sealer that fits the look
- Topcoat matched to the traffic, plus applicators
Quick answers
Water-based or oil-based finish?
Water-based dries fast, has low odor, low VOCs and stays clear. Oil-based adds a warm amber tone and builds a tough film, but needs wait longer between coats. Both are in stock at all six stores.
Can I put water-based finish over an oil-modified stain?
Our oil-modified stains are compatible with both oil-based and water-based finishes once dry. Always follow the label dry times.
Do you carry finishes besides Bona?
Yes: Pallmann, DuraSeal and Basic Coatings, plus all major oil-based brands.
Pick it up at any of our six stores
Great prices on everything we carry is why professionals have trusted First Atlanta Flooring for 17 years. We open by 7 AM on weekdays (Marietta at 6:30 AM) in Alpharetta, Lawrenceville, Marietta, Norcross, Suwanee and Winder. Call ahead and we’ll have it pulled and ready.
